CURRENT LEAD TIME: 1 WEEK
Back by popular demand, we are making our washer hub dome brackets avaiable again. Our 1V Strip Bracket Dome Kit is not only a cost-effective alternative to our standard sheet metal hubs, it is also an ideal solution for constructing a smaller dome (under 12ft in diameter). We use 1/8" thick HRS metal strips, bent to the appropriate angle, and a center washer hub can be added to ensure all struts lie in the same plane. Alternatively, struts can be connected by bolting them together just as with our steel pipe domes.
Assembling this dome requires the same steps as all our other domes but we recommend screwing on the strips first and then bolting them to one-another as you go up. This dome only requires 2 people to assemble and around 2-3 hours to complete. The strips could be added on the outside or inside of the dome so depending on your application you could reinforce the frame by adding a second set.
These kits will be delivered unfished but you may spray paint them with enamel once they are assembled. You will be required to assemble each hub if you order the washer option.
- 1/8" HRS strips 1-1/2" wide, 6" long
- Optional center hub washer
- Unpainted finish
- (25) Pieces of lumber
- 3.0" Long Construction Screws
- Circular saw or hand saw
- (50) Bracket strips
- (11) Center Hub Washers (Optional)
- All necessary hardware (bolts, washers, nuts, locknuts)
Timber domes are perfect for:
- Green Houses
- Glamping Tents
- Rooftop Igloos
- Hammock Domes
- Beer Gardens
Assembly: The provided manual will have detailed assembly instructions that are so easy one person could put one together in 1-2 hours